Economic Development

Community data checklist for investment attraction and site selection in Canada

What to have ready before the next investor or site selector inquiry.

Canada Data Explorer’s similar regions tool, listing the 10 municipalities most like Moncton on 10 figures from the 2021 Census, led by Peterborough, Sherbrooke and Saint John at 93% alike, with a table of their figures side by side

Are you ready for the next investor inquiry?

An email arrives from a site selection consultant. Their client is weighing a new facility in your region, and they want to know about your population, your workforce, the businesses already here and what sets your community apart. They would like it by the end of the week.

For most economic development teams, the answer is spread across census tables, labour market surveys, municipal plans and local knowledge. Pulling it together under a deadline is where errors creep in: a figure from the wrong year, a region that doesn’t match the one being compared, or a statistic with no source behind it.

The teams that respond well usually have one thing in common. Their core community data is already assembled, current and comparable before the inquiry arrives. This checklist covers what that data should include, how to compare it fairly and how Canada Data Explorer can help you put it together.

What information do investors and site selectors need?

Site selection usually narrows in stages. Consultants often start by screening communities online against a client’s criteria, shortlist a few for site visits and interviews, then negotiate with one or two. British Columbia’s guidance on the site selection process (opens in a new tab) describes that progression, from about seven or eight communities to about three, and notes that early screening relies on standardized statistics based on the International Economic Development Council’s data standards. Because the first stage happens online, a community can be ruled out before it knows it was being considered.

That makes three kinds of information worth separating:

  • Quantitative community and regional data: population, workforce, industry and housing statistics. This is what early screening relies on, and it is often presented in a standardized statistical profile.
  • Qualitative information: business sentiment, success stories, quality of life and the regional advantages numbers can’t show. BC’s guidance on information requirements for site selection (opens in a new tab) , for example, recommends that community profiles "combine qualitative information with quantitative data."
  • Property-specific information: land inventories, available buildings, servicing and zoning. Several provinces help communities document it. Ontario’s Investment Ready: Certified Site (opens in a new tab) program certifies industrial properties that meet minimum requirements for zoning, size, road access and servicing, and Atlantic Canada Certified Sites (opens in a new tab) lists vetted, development-ready sites in New Brunswick, Newfoundland and Labrador, Nova Scotia and Prince Edward Island.

Provinces also publish data that investors can consult before they ever contact you. Alberta’s Site Selection Tool (opens in a new tab) , for instance, combines commercial property listings, infrastructure and 89 socio-economic indicators from the Alberta Regional Dashboard. Find out what your province publishes about your community, and make sure your own profile is consistent with it.

The programs and tools differ from province to province, but the pattern holds across Canada. Statistics get a community onto the list. Local knowledge and site details keep it there.

Investment attraction data checklist: what should your community profile include?

1. Population and demographics

Start with population size and growth, age distribution, household characteristics and migration where it’s available. Together they tell an investor how large the community is, whether it is growing, and what its consumer market and future labour supply may look like.

See population change from 2016 to 2021 for the Lethbridge–Medicine Hat region of Alberta and its neighboursOpens in Canada Data Explorer, in a new tab

Show change over time, not just a snapshot. A community that grew between census years tells a different story from one that held steady, and a younger age profile signals something different from an older one.

2. Workforce and skills

Investors want to know whether they can staff an operation. Useful indicators include the labour force and participation rate, employment and unemployment, educational attainment, occupations, and, where available, wages and job vacancies.

Check the geography of each source. Census labour force data is available for municipalities and smaller areas, but monthly and quarterly labour market surveys are published for broader regions. A regional unemployment rate or job vacancy figure describes the region, not necessarily your municipality.

See the share of adults with a bachelor’s degree or higher in Division No. 2, Alberta, which includes LethbridgeOpens in Canada Data Explorer, in a new tab

3. Local business and industry structure

Business counts by industry and size, employment by industry and regional economic indicators such as GDP describe the economy an investor would be joining. They can show existing industry concentrations, potential suppliers and the sectors that already employ local residents.

Treat them as context, not proof. A cluster of businesses in one industry suggests an established base, but it doesn’t confirm that a new investment in that industry will succeed.

See wholesale and retail trade businesses in Lethbridge, Alberta, compared with all industriesOpens in Canada Data Explorer, in a new tab

4. Housing and community conditions

Housing matters to investors because it affects whether workers can live nearby. Census indicators such as dwelling types, tenure and shelter costs, along with population growth and housing construction indicators where available, provide context for workforce attraction and long-term growth.

They describe conditions at a point in time. They don’t establish current rental availability or whether housing will be affordable for a particular project’s workforce.

See renter households in Lethbridge, Alberta, and nearby communitiesOpens in Canada Data Explorer, in a new tab

5. Infrastructure, serviced land and available properties

Transportation access, utilities and servicing capacity, zoning and available employment lands, buildings and sites are central to investment readiness. They usually come from municipal planning and engineering departments, utilities and commercial real estate sources, and they need to be kept current.

This is the part of a profile that statistical tools don’t cover. Plan to maintain it separately and link to it from your profile.

6. Regional comparisons and competitiveness

A site selector is comparing you with other places, so it helps to know how you compare first. Choose genuine peers: communities of similar size, nearby competitors or comparable metropolitan areas. Compare them using the same geographic level, the same reference period and measures that account for size, such as percentages, rates and per-capita figures.

Compare median household income in Lethbridge, Alberta, with Red Deer, a city of similar size in the same provinceOpens in Canada Data Explorer, in a new tab

The checklist at a glance

Data category Example indicators Why it matters Where it usually comes from
Population and demographics Population and growth, age distribution, households, migration Market size, growth trend and future labour supply Census, population estimates
Workforce and skills Labour force, participation, education, occupations, wages, vacancies Whether an operation can be staffed Census, labour market surveys
Business and industry Business counts by industry and size, employment by industry, GDP The existing economic base and potential suppliers Business registers, census, national accounts
Housing and community Dwelling types, tenure, shelter costs, housing construction Whether workers can live nearby Census, housing agencies
Infrastructure and properties Transportation, servicing, zoning, available land and buildings Whether a specific project is feasible Municipal, utility and real estate sources
Regional competitiveness The same indicators for peer communities How you compare with the alternatives All of the above, compared consistently

How to use Canada Data Explorer to prepare a data-backed community profile

Canada Data Explorer brings Canadian census, demographic, labour market, housing and economic data together on an interactive map, with no GIS software needed. There are two ways to use it for the statistical side of a community profile.

Option A: Generate an Investment Readiness Summary (5 minutes) Organization

Summary Report creates standard Word reports on any region, with your logo, from shared templates: Region Profile, Economic Summary, Investment Readiness, Labour Market and Housing. No AI is involved. The figures come straight from the data.

  1. Choose your region. Select your municipality or region, or several regions to report on as one area, such as your municipality and its neighbours.
  2. Choose the Investment Readiness template. It follows the categories in this checklist: population and demographics, workforce and skills, business and industry, and housing and community.
  3. Create the report. You get key figures at a glance, then tables and charts for each category, with where your community ranks among the municipalities of its province and of Canada, and the source of every figure.
  4. Add what only you know. The report leaves a section of your own for infrastructure, serviced land and available sites. Add your local knowledge and success stories, and it’s ready to send.

See what you get: download the sample Investment Readiness Summary for Lethbridge, Alberta (PDF, 1.7 MB).

Option B: Find the data yourself in Canada Data Explorer Free

If you’d rather choose each indicator yourself, you can start with a free account.

  1. Find your community. Search for your municipality or region and choose the right region type: municipalities (census subdivisions), census divisions, economic regions or metropolitan areas, among 14 types.
  2. Choose your indicators. Browse the data layers by topic, or search for the ones on your checklist, such as population growth, median age or educational attainment.
  3. Explore the map. Shading shows how the indicator varies across your region and its neighbours, which often raises the questions a site selector will ask.
  4. Compare with your peers. Select the communities you want to compare. Each figure shows where a region ranks in its province and in Canada, and the similar regions tool suggests communities that resemble yours on several measures at once.
  5. Review the details and sources. Explore brings charts for your selected regions together by topic, and every figure shows its source and reference period, so you can cite it with confidence.
  6. Share or export your findings. Send a link to your view, save a map screenshot or a chart image, or, on Pro and Organization plans, export formatted Excel workbooks with data tables and charts.
Canada Data Explorer's map of population percentage change from 2016 to 2021 across Alberta's eight economic regions, from the 2021 Census population and dwelling counts, ranked beside the map from Edmonton (7.0%) to Banff–Jasper–Rocky Mountain House (−2.1%), with Lethbridge–Medicine Hat third at 3.6%
Population change from 2016 to 2021 across Alberta’s eight economic regions (2021 Census), ranked beside the map with the source. Lethbridge–Medicine Hat grew 3.6%, third in the province.

Most census data is available with a free account. Business counts, the Labour Force Survey and job vacancy and wage data are part of the Pro plan, and housing starts and building permits are part of the Organization plan. The Data page lists every dataset, its geographic coverage and the plan it needs, and Pricing compares the plans.

Canada Data Explorer's map of residents aged 15 to 64 as a share of the population across Manitoba's census divisions, from the 2021 Census, with the 10 highest selected and ranked beside the map from Division No. 11 (66.4%) to Division No. 9 (61.2%), an average of 63.7% and a median of 64.0%
The 10 Manitoba census divisions with the highest share of working-age residents, aged 15 to 64 (2021 Census), ranked beside the map with their average, median and source.

Common mistakes to avoid when comparing communities

  • Comparing areas that aren’t equivalent. A municipality, a census division and a metropolitan area can share a name but cover very different populations. Compare like with like, and say which geography each figure describes.
  • Mixing years and reporting periods. A 2021 census figure beside a monthly survey estimate from this year can suggest a change that is really a difference in timing or method. Label every figure with its reference period.
  • Using counts where rates tell the story. A larger community will have more businesses and more unemployed people simply because it is larger. Use percentages, rates and per-capita measures when comparing places of different sizes.
  • Overlooking definitions and limitations. Indicators with similar names can be defined differently, and small-area data may be rounded or suppressed. Read the notes before drawing conclusions.
  • Letting one indicator carry the case. No single statistic establishes investment readiness. A strong profile combines several indicators with local knowledge and site-specific information.

Make your community data easier to find, compare and share

Investment attraction depends on both evidence and story. Reliable, comparable statistics help your community make it through early screening. Local knowledge, business relationships and ready sites help it win once it does.

Having the statistical side assembled before an inquiry arrives makes the rest of the work easier. Canada Data Explorer supports that part of the process: finding, comparing and presenting Canadian community data. It doesn’t replace your local expertise or the property-specific due diligence an investor will expect.

You can also put that information where investors often look first: your own website. With the Organization plan, you can publish interactive maps, community profiles, economic dashboards and individual charts on your site, showing your region in your organization’s branding. Visitors explore your community’s data without leaving your site or creating an account, and it updates with every new data release.

For more on how economic development teams use Canada Data Explorer, see Canada Data Explorer for economic development.